Heat Reflective Waterproof Polyurethane Elastomer


  • 5 kg.
  • 25 kg.


  • Light Grey, White, Light Green


Dr.Fixit Newcoat PU Cool is a 100% high concentrated water-based polyurethane elastomer. Apply in high strength application. When dry forms a rubberlike properties, features high flexibility, reduce shrinkage, weather resistance, solar reflectance, easy to use, quick drying, does not need fibre reinforcement, seamless, seals joint, prevent water penetrating surface by 100%.

Features & Benefits

  • High Flexibility Throughout Lifecycle
  • Long Lasting
  • UV & Weather Resistance
  • Adhere to Varies Surface
  • Breathable
  • Nontoxic, Water Based
  • Easy to Use
  • Vibration durability against earthquake

Area of Application

Surface Preparation
  • Ensure surface is clean from dirt & loose material
  • Treat any hole or defects with suitable material and allow to completely dry
  • Application in high temperature surface, reduce surface temperature with water & wait to dry prior to application
  • Adjust the roof slope so that there is no ponding on surface
  • Sealed all joints with suitable sealant
  •  For priming apply a primer or Dr.Fixit Newcoat PU Cool, especially in porous surface
  •  Dilute Dr.Fixit Newcoat PU Cool of a ratio of 1:1 (Dr.Fixit Newcoat PU Cool per : clean water) for primer    application of coverage for 8 to 10m2, leave to dry 1-2 hours prior to next application
  •  Dr.Fixit Newcoat PU Cool is premixed & ready to use, stir thoroughly till a homogeneous paste is form to suspend all pigment prior to application
Waterproof & Solar Reflectance
  • In foundation application
  •  Apply 1st coat of Dr.Fixit Newcoat PU Cool Ratio 0.5 Litre/mm2 or 0.70 Kgs/mm2                                                            (Dry Films Thickness about 1 mm)
  • Allow 1st coat to dry 1 to 2 hours prior to applying 2nd coat perpendicularly
  • If 3rd coat is necessary, apply it perpendicularly to 2nd coat after 2nd coat dried for 1 to 2 hours
Solar Reflectance
  • In foundation application
  • Apply 1st coat of Dr.Fixit Newcoat PU Cool Ratio 0.2 Litre/mm2 or 0.25 Kgs/mm2
  • (Dry Films Thickness about 300-350 micron)
  • Allow 1st coat to dry 1 to 2 hours prior to applying 2nd coat perpendicularly
Precautions & Limitations
  • Working temperature 10 °C to 35 °C
  • Do not apply on surface with negative water pressure, wet surfaces of water retaining structures such as swimming pool & pond
  • Do not work in direct sun or on hot surfaces to prevent cavities formation


Click for download